To purchase a boat trailer from us simply select the trailer best suited for your boat by either:

• Using our Boat Trailer Finder
• Browse our range of Boat Trailers

Once you have chosen the boat trailer suited for your boat simply click 'Place order for Trailer' button which will take you to the Boat Trailer Order Page. Please select your Payment Options and fill in your Shipping Details to complete your order. Please note: You will only be paying a 30% deposit to secure your boat trailer order.

To find the correct trailer for your boat please use our Boat Trailer Finder.

Boat length is measured from the bow to transom illustrated below (A). (excluding swimming platform).

To find the correct trailer for your boat please use our Boat Trailer Finder.

Typically on a boat/trailer the overall weight of the boat/motor trailer should not exceed between 5-7% of the total weight on the towball. Eg Boat/Motor/Trailer weights 800kg the towball weight should not exceed 56kg as a general rule.

The correct weight should be between 5% to 10% of the overall GVM capacity. Example - Trailer with 1999kg GVM. Towball weight 99kg to 199kg. Having the wrong towball weight will effect the performance when being towed at > 60 kph

Laws in Australia require boat/motor and trailer packages that weigh over 750kg including all three weights require brakes. If the boat/motor and trailer weighs over 2000kg you will need a breakaway system. See our Hydrastar Braking system page on our website for more information.

Yes we have rollers in a double roller set or quad roller set that clamp to most frames being 50mm or 75mm. See our parts section on our "Trailer Repair Centre" Website to view these rollers. Codes 3100 and 3110.

YES. Everything that can be Galvanised is including axles, hubs, springs, u-bolts, nuts and washers are all galvanized.

trailers have Ford type stud pattern

White Rust. The condition of the galvanised finish is governed by the environment in which the trailer is maintained and stored. Deterioration of the galvanizing (and the formation of 'white rust') is accelerated in areas of high humidity, poor ventilated storage, high salinity or poor water levels. See the following article for a detailed explanation.

It is recommended that your trailer be serviced at least once a year, with brakes and bearings requiring six monthly service attention. Checks should be done on all your running gear including bearings, hubs, brakes, wheels and tyres. Wash your trailer down after each use and check that all bolts and nuts are tight. Regular maintenance will lengthen the life of the trailer and keep the trailer in safe operation.

Every trailer has a compliance plate fitted Vehicle Identification Number (VIN) included in the price.

No. The boat trailer needs to be registered in your name by you. We will supply you the receipt that has all the information on it to register the boat trailer including the VIN Number. Take the receipt along with the trailer to the transport department to register the boat Trailer.

For more information in regards to registering a light trailer in QLD pleaes visit Transport and Main Roads website here: http://www.tmr.qld.gov.au/Registration/Registering-vehicles/Caravans-and-light-trailers.aspx

You will require the following documents for trailer registration in QLD:

• F3518 - Vehicle Registration Application
• F3970 - Self Assessment of Single Axle Trailers form. Trailers with an Aggregate Trailer Mass (ATM) of 750 kgs or less do not have to be inspected and can be self-assessed by completing this form.

For more information in regards to registering a light trailer in QLD pleaes visit Transport and Main Roads website here: http://www.tmr.qld.gov.au/Registration/Registering-vehicles/Caravans-and-light-trailers.aspx

You will require the following documents for trailer registration in QLD:

• F3518 - Vehicle Registration Application
• F3970 - Self Assessment of Single Axle Trailers form. Trailers with an Aggregate Trailer Mass (ATM) of 750 kgs or less do not have to be inspected and can be self-assessed by completing this form.

Our freight charges include packaging, pallet, freight, insurance and gst. Click here to view shipping rates in your area.

We recommend for all Boat to Trailer fittings:

• Dave Pemberton, Ph: 0427 778 373

YES. Cilck here for full warranty information.

• LANOX-mx4 is a heavy duty anti-moisture, anti-corrosion lubricant made with a high grade lubricating oil and refined pure lanolin base with specialized chemical compounds.
• LANOX-mx4 contains no silicon, kerosene, acids or dieselene.
• LANOX-mx4 is harmless to metal points and surfaces, plastics, painted and enamel finishes, fibreglass, formica, rubber or neoprene seals.
• LANOX-mx4 doesn't become sticky, gooey or gum up. DOESN'T DRY OUT OR WASH OFF WITH WATER.
• LANOX-mx4 is non-conductive, non-static, non-corrosive and non-toxic.
• LANOX-mx4 prevents electrolysis between dissimilar metals.
• LANOX-mx4 is extremely resistant to salt water and drying out.

1. BC-4000 (4.0 Metre) Outer Bearing # LM12749 - Inner Bearing # L68149 Water Proof Seal # 42-60-8
2. BC-5000 (5.0 Metre) Outer Bearing # LM12749 - Inner Bearing # L68149 Water Proof Seal # 42-60-8
3. BC-5500 (5.50 Metre) Outer Bearing # LM12749 - Inner Bearing # L68149 Water Proof Seal # 42-60-8
4. BC-6000 (6.0 Metre) Outer Bearing # LM12749 - Inner Bearing # L68149 Water Proof Seal # 42-60-8
5. BC-6900 (6.90 Metre) Outer Bearing # L68149 - Inner Bearing # L68149 Water Proof Seal # 42-60-8
6. BC-7200 (7.20 Metre) Outer Bearing # L68149 - Inner Bearing # L68149 Water Proof Seal # 42-60-8
7. BC-DOUBLE-JET-SKI Outer Bearing # LM12749 - Inner Bearing # L68149 Water Proof Seal # 42-60-8
8. BC-JET-SKI  Outer Bearing # LM12749 - Inner Bearing # L68149 Water Proof Seal # 42-60-8
9. Box Trailers All - Inner = LM 16849 Outer = LM12749